SSC JE Signature Resizer
For SSC JE 2026 the photo is captured live in the application form, so only the signature is uploaded: a JPEG of 10 to 20 KB, about 6.0 cm wide and 2.0 cm high.
Free, no sign-up. Your photo never leaves your device.
Photo
Live capture
Taken by camera in the form, not uploaded
Signature
10 to 20 KB
709 x 236 px, JPG
Official rules
SSC JE signature size
SSC Junior Engineer (Civil, Mechanical and Electrical) Examination, conducted by the Staff Selection Commission (SSC). Upload rules from the SSC Junior Engineer 2026 notice (F. No. HQ-C-3019/1/2026-C-3, 2 September 2026):
| Document | Size in the notification | File size | Format | This tool makes |
|---|---|---|---|---|
| Signature | about 6.0 cm (width) x 2.0 cm (height); no pixel size or DPI given | 10 to 20 KB | JPG | 709 x 236 px |
Rules last checked on . Notification: F. No. HQ-C-3019/1/2026-C-3, published .
The tool checks the file it makes against these numbers. A passing file is not a guarantee that the SSC JE portal will accept it.
हिंदी में पढ़ें: SSC सिग्नेचर 10-20 KB में कैसे बनाएं (JE, CPO, CHSL 2026)
Good to know for SSC JE
- The photo is captured live in the form by webcam or phone (or the SSC app through a QR code). Old photos and photos of a photo are rejected: sit in good light in front of a plain wall, camera at eye level, no cap, mask or glasses.
- PwBD candidates who ask for a scribe or extra time also upload a disability certificate (Annexure-I or IA) while filling the form.
- Applications with blurred or miniature signatures are rejected, except for candidates who complete Aadhaar authentication.
Step by step
How to resize the SSC JE signature
- 1
Sign on white paper
Sign with a black pen on plain white paper and take a clear picture of it. The SSC JE size and KB range are already selected.
- 2
Add your picture
Choose the picture from your gallery or take a new one. JPG, PNG, WebP and iPhone HEIC pictures work.
- 3
Crop and adjust
Drag and zoom until the signature fills the box with a little white space around it. Raise the contrast if the ink looks pale.
- 4
Make and download
Press Make. The file comes out inside the allowed KB range, and the tool checks the downloaded file itself: format, KB, pixels and print size for the SSC JE form.
Avoid mistakes
Why SSC JE uploads get rejected
- The signature is outside 10 to 20 KB, or it is a photo of the whole page instead of a close crop of the signature.
- The signature is blurred, very small inside the picture, or written in capital letters.
- It was signed on lined or coloured paper, or with a pencil or a light pen.
- For the live photo: poor light, a busy background, a cap, mask or glasses, or the face partly outside the frame.
- For the live photo: a picture of an old printed photo or of a screen held in front of the camera.
Tips for a clear signature
- Sign a little larger than usual with a black pen on plain white paper, so the signature stays sharp in a small file.
- Photograph it from straight above in daylight. A tilted or shadowed picture looks blurred once it is made small.
- Crop close: the signature should fill most of the frame, with a thin white margin.
- Before the live photo, sit facing a window in front of a plain wall, keep the phone at eye level and remove cap, mask and glasses.
- Use the same signature you will make at the SSC JE exam centre; a mismatch can cancel the candidature.
FAQ
SSC JE signature FAQ
What is the SSC JE signature size?
about 6.0 cm (width) x 2.0 cm (height); no pixel size or DPI given, as a JPG file of 10 to 20 KB. The tool makes it 709 x 236 px. Sign with a black or dark blue pen on plain white paper.
Do I need to upload a photo for SSC JE 2026?
No. The form captures a live photo by webcam or through the SSC app. A photo of an old photograph is rejected.
What is the SSC JE signature size?
Paragraph 10.6 of the 2026 notice: a JPEG of 10 to 20 KB, about 6.0 cm wide and 2.0 cm high. No pixel size is given.
Some websites say the SSC JE signature is 140 x 60 pixels or 4 x 3 cm. Which is right?
Those numbers are not in the 2026 Junior Engineer notice. It gives about 6.0 cm x 2.0 cm and 10 to 20 KB, in paragraph 10.6 and again in the How to Apply annexure.
What is 6 cm x 2 cm in pixels for the SSC signature?
It depends on the resolution: 709 x 236 px at 300 DPI, 472 x 157 px at 200 DPI, or 227 x 76 px at 96 DPI. The 2026 notices give no pixel size or DPI; they ask for a JPEG of 10 to 20 KB, about 6.0 x 2.0 cm. The tool makes 709 x 236 px and writes 300 DPI into the file, so it measures 6 x 2 cm.
The SSC form says my signature is not uploading or the dimension is wrong. What should I check?
Check four things: the file is a real JPEG (not a PNG or a renamed file), it is between 10 and 20 KB, it is about three times wider than tall, and the signature fills the image instead of sitting small in the middle. The result panel of this tool shows each of these for the file you download. If the form still refuses it, call the SSC helpline 1800 309 3063 given in the notice.
Should I sign with a black or blue pen for SSC?
The 2026 notices do not name an ink colour. They reject blurred and miniature signatures, so sign large with a dark pen, black or dark blue, on plain white paper, where it photographs most clearly.
The SSC live photo is not capturing. What can I do?
The notice asks for good light, a plain background, the camera at eye level and the whole face inside the area shown on screen, without cap, mask or glasses. If your computer camera does not work, scan the QR code under Upload Documents in the form to get the SSC app for Android phones and capture the photo there. Never photograph an old printed photo: those forms are rejected.
Are these SSC JE rules up to date?
They were last checked on 2026-10-26 against the SSC Junior Engineer 2026 notice (F. No. HQ-C-3019/1/2026-C-3, 2 September 2026). Rules can change with every notification, so compare them with the latest one on the official website before you upload.
Explore