Skip to main content

CTET Photo & Signature Resizer

CTET asks for a scanned photo of 10 to 100 KB, 3.5 cm wide and 4.5 cm high, and a signature of 3 to 30 KB, 3.5 cm long and 1.5 cm high, both as JPG. There is no live photo, so the uploaded photo is the one matched with you at the exam.

Free, no sign-up. Your photo never leaves your device.

Photo

10 to 100 KB

276 x 354 px, JPG

Signature

3 to 30 KB

276 x 118 px, JPG

Signature guide

Official rules

CTET photo and signature size

Central Teacher Eligibility Test, conducted by the Central Board of Secondary Education (CBSE). Upload rules from the CTET September 2026 Information Bulletin:

DocumentSize in the notificationFile sizeFormatThis tool makes
Photo3.5 cm (width) x 4.5 cm (height); no pixel size or DPI given10 to 100 KBJPG276 x 354 px
Signature3.5 cm (length) x 1.5 cm (height); no pixel size or DPI given3 to 30 KBJPG276 x 118 px

Rules last checked on . Notification: CTET September 2026 Information Bulletin (22nd edition), published .

The tool checks the file it makes against these numbers. A passing file is not a guarantee that the CTET portal will accept it.

Good to know for CTET

  • The bulletin gives sizes in cm only. The tool makes the photo 276 x 354 pixels and the signature 276 x 118 pixels, and writes 200 DPI into the files so they measure right.
  • Some sites quote 10 to 200 KB for the photo or 4 to 30 KB for the signature. The September 2026 bulletin says 10 to 100 KB and 3 to 30 KB.
  • Check the next session's bulletin when it comes out; CBSE can change the figures.

Step by step

How to resize the CTET photo and signature

  1. 1

    Pick the document

    CTET is already selected. Choose photo or signature; the size and KB range from the CTET September 2026 Information Bulletin are applied for you.

  2. 2

    Add your picture

    Choose the picture from your gallery or take a new one. JPG, PNG, WebP and iPhone HEIC pictures work.

  3. 3

    Crop and adjust

    Drag and zoom until the face fits the guide (or the signature fills the box). Fix the brightness or contrast if needed.

  4. 4

    Make and download

    Press Make. The file comes out inside the allowed KB range, and the tool checks the downloaded file itself: format, KB, pixels and print size for the CTET form.

Avoid mistakes

Why CTET photos get rejected

  • The photo is outside 10 to 100 KB. Files that are too small are refused as well as files that are too big.
  • The signature is outside 3 to 30 KB, or it is a photo of the whole page instead of a close crop of the signature.
  • The face is too small, cut off at the top, or turned to one side.
  • The background is dark, patterned or has shadows, or the photo is blurred, too dark or too bright.
  • A selfie, a group photo, a photo of a printed photo, or an old photo was used.
  • The file is a PNG, HEIC or PDF when the form wants JPG, or it was renamed instead of converted.

Tips for a clear photo and signature

  • Stand in front of a plain white or light wall, facing a window, so the face is evenly lit without shadows.
  • Keep the face straight and fill about three quarters of the photo height, from the top of the hair to the chin. Eyes open, mouth closed, no caps or dark glasses.
  • Sign on plain white paper with a black or dark blue pen, press firmly, and photograph it from straight above in daylight.
  • Crop closely around the signature or thumb mark. White space wastes the size limit and makes the mark look small.
  • Use the same photo everywhere in the CTET application and keep a few prints; the same photo is often needed at the exam centre.

FAQ

CTET photo and signature FAQ

What is the CTET photo size?

3.5 cm (width) x 4.5 cm (height); no pixel size or DPI given, as a JPG file of 10 to 100 KB. The tool makes it 276 x 354 px.

What is the CTET signature size?

3.5 cm (length) x 1.5 cm (height); no pixel size or DPI given, as a JPG file of 3 to 30 KB. The tool makes it 276 x 118 px. Sign with a black or dark blue pen on plain white paper.

What is the CTET photo size?

A JPG of 10 to 100 KB, 3.5 cm (width) x 4.5 cm (height). The signature is a JPG of 3 to 30 KB, 3.5 cm x 1.5 cm.

What is 3.5 x 4.5 cm in pixels for CTET?

It depends on the resolution: 276 x 354 pixels at 200 DPI, or 413 x 531 at 300 DPI. CBSE gives only the cm size and the KB range; the tool uses 200 DPI.

Can I upload a PNG or PDF photo for CTET?

No. The bulletin accepts JPG or JPEG only for the photo and the signature.

Are these CTET rules up to date?

They were last checked on 2026-11-04 against the CTET September 2026 Information Bulletin. Rules can change with every notification, so compare them with the latest one on the official website before you upload.